// put your#include <Adafruit_NeoPixel.h>

const int buttonPin = D1;
const int led1Pin = D7;
const int led2Pin = D6;
const int maxClicks = 5;

int clickCount = 0;
int Power = 11;
int PIN = 12;
#define NUMPIXELS 2

Adafruit_NeoPixel pixels(NUMPIXELS, PIN, NEO_GRB + NEO_KHZ800);

void setup() {
  pixels.begin();
  pinMode(Power, OUTPUT);
  digitalWrite(Power, HIGH);

  pinMode(buttonPin, INPUT);
  pinMode(led1Pin, OUTPUT);
  pinMode(led2Pin, OUTPUT);
}

void loop() {
  int buttonState = digitalRead(buttonPin);

  if (buttonState == HIGH) {
    delay(50);  // Debounce delay
    if (digitalRead(buttonPin) == HIGH) {
      clickCount++;
      clickCount = min(clickCount, maxClicks);
      activateLEDs();
      delay(500);
      clickCount = 0;
    }
  }
}

void activateLEDs() {
  for (int i = 0; i < clickCount; i++) {
    digitalWrite(led1Pin, HIGH);
    digitalWrite(led2Pin, HIGH);

    // changes color of the NeoPixel
    pixels.clear();
    pixels.setPixelColor(0, pixels.Color(15, 25, 205));
    pixels.show();
    delay(400);
    pixels.clear();
    pixels.setPixelColor(0, pixels.Color(103, 25, 205));
    pixels.show();
    delay(400);
    pixels.clear();
    pixels.setPixelColor(0, pixels.Color(233, 242, 205));
    pixels.show();
    delay(400);
    pixels.clear();
    pixels.setPixelColor(0, pixels.Color(233, 23, 23));
    pixels.show();
    delay(400);
    pixels.clear();
    pixels.setPixelColor(0, pixels.Color(12, 66, 101));
    pixels.show();
    delay(400);
    delay(500);

    // turns off LEDs y NeoPixel
    digitalWrite(led1Pin, LOW);
    digitalWrite(led2Pin, LOW);
    pixels.clear();
    pixels.show();
  }
}
 code here